IME TDG82 Current Transformers + ABB RCBO Breakers Job Lot - Used

What you get

• 2 x IME TDG82 current transformer (split-core style) — please refer to photographs and label for exact sensitivity / primary window diameter / part code
• 6 x ABB RCBO breakers (2‑pole shown) — please refer to photographs and label for exact current rating, trip curve and part code

Features

• IME TDG82 current transformers: split‑core construction for clamp‑on installation without disconnecting conductors; compact housing with mounting provisions; fitted secondary connection cable and terminal block for easy wiring.
• ABB RCBO breakers: combined residual current device (RCD) and miniature circuit breaker (MCB) functionality — provides both earth‑leakage protection and overcurrent/short‑circuit protection in a single module; DIN‑rail mounting form factor; integral toggle for manual operation and reset.
• Designed for use in electrical distribution and protection applications: monitoring, selective earth‑fault protection and branch circuit protection.
• Suitable for retrofit or replacement in compatible panels — check dimensions and terminal arrangements against your installation.

Specifications

• IME TDG82 (typical fields to verify on unit):
  • Model: TDG82 (as labelled)
  • Type: Split‑core current transformer / residual current sensor
  • Primary window diameter: [refer to label / measure opening]
  • Sensitivity / nominal residual current (where marked): e.g. IΔn = [value] (check label)
  • Secondary output / ratio: [check label – e.g. mA or A output depending on model]
  • Connection: integral cable / terminal block (as shown)
  • Mounting: base feet / clip (as shown)
• ABB RCBO breakers (typical fields to verify on unit):
  • Manufacturer: ABB
  • Type: RCBO (residual current operated circuit‑breaker with overcurrent protection)
  • Poles: 2‑pole (as pictured)
  • Rated current: [check unit label — e.g. 6A, 10A, 16A, 20A, 32A etc]
  • Residual current (earth leakage) trip sensitivity: [check label — commonly 30 mA or 100 mA etc]
  • Tripping characteristic (B, C, D etc): [check label for curve type]
  • Mounting: DIN‑rail
  • Connection: screw terminals (as pictured)

History

Notes & Recommendations

• Quantities, ratings and full part codes must be confirmed from the photographs and the labels on the individual units prior to purchase; this template intentionally leaves [QTY] and specific rating fields for accurate completion.
• These are electrical protection and sensing devices — they should be installed and tested by a qualified electrician or engineer in accordance with local regulations and standards.
• No additional items are included beyond those shown and described above. All items are sold as seen.